What should you pay attention to in the hammer application?

Time:2018-01-06 12:51

  In order to ensure the excellent application effect of the hammer manufacturer, the place of attention in some applications must not be ignored. Knowing clearly can help us better use the hammer to get the best application effect.
  In the application of the hammer, the connection between the hammer and the handle must be firm. If the hammer and the hammer are loose, the hammer handle must be cracked and cracked. The wedge of the hammer head and the hammer handle are added to the mounting hole, and the metal wedge is preferred. The length of the wedge is not more than 2/3 of the depth of the mounting hole. In order to have a certain elasticity when hitting, the middle of the handle is slightly narrower than the end. When using a sledgehammer, you must pay attention to the front, back, left and right, up and down, and it is strictly forbidden to stand in the range of the sledgehammer. It is forbidden to use the sledgehammer and the small hammer.
  In addition, the hammer head made by the hammer manufacturer is not allowed to quench, and cracks and burrs are not allowed. It is found that the flashing of the flashing edge should be repaired in time, so as to ensure the normal use of the hammer and obtain the best application effect.